end ring meaning in English
短路环
销紧环
终端环
轴承挡圈
Examples
- Shaft end ring
轴端挡圈 - Each rotor core is visually inspected for complete filling of the die - cast end rings and fan blades
每个转子芯都经过人工检查是否完整配置压铸轴承挡圈和风机叶片。 - The squirrel - cage winding consists of aluminium or copper bars embedded in the rotor slots and shorted at both ends by aluminium or copper ends rings
鼠笼型绕组由铝或者铜制的金属条嵌入转子的槽内并用铝或者铜制的环在两端短路。 - Cu - zn - cr - zr conducting bar alloy and cu - cr - zr end ring alloys used for superpower asynchronous traction motor rotor were prepared by ingot metallurgy . using hardness measurement , tensile test at room and higher temperature , electrical resistance test at room and higher temperature , optical microscopy , xrd , sem , and tem , the mechanical and electric properties and the microstructure of above alloys at different treatment were studied . them were also analysed and explained in theory
采用铸锭冶金法制备了大功率异步牵引电动机转子用导条合金和端环合金，通过硬度测试、室温拉伸、高温拉伸、电导率测定、金相分析、 xrd 、 sem 、 tem等方法研究了不同加工工艺和热处理工艺对上述合金力学性能、导电性能及其组织结构的影响和变化规律，并从理论上进行了分析和解释。 - 6 5 = 27 . 8 % , o r = 74 . 3 % iacso the second , above alloys not only have good strength and conductibility at room temperature but also have good strength at high temperature . bar alloy can hold o b = 274mpa and o o2 = 250mpa at 350 ? while end ring alloy can hold o b = 200mpa and o 02 = l65mpa at350 ?
研究合金不仅在常温具有很好的强度和导电性，而且具有较高的高温强度，导条合金在350时b仍保持在274mpa左右， 0 . 2仍保持在250mpa左右；端环合金在350时b仍保持在200mpa以上， 0 . 2仍保持在165mpa以上。